Original file

Opel Vivaro Bosch EDC16CP33 8200666516 / 1037390530

An original (stock) flash read of the Bosch EDC16CP33 control unit, fitted in Opel Vivaro, hardware number 8200666516 and software number 1037390530, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Opel Vivaro2.0 diesel 90PS
Control unit
Bosch EDC16CP33
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
8200666516
Software number
1037390530

Technical data

Vehicle
BrandOpel
Car modelVivaro
Engine2.0 diesel 90PS
Power90.0PS / 66.2kW
Control unit
Control unitBosch EDC16CP33
ECU makerBosch
Hardware number8200666516
Software number1037390530
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keye50f8491d15d5b5b
Identification read from the file
ECU nameEDC16CP33
Read typeFull read (boot area included)
ProcessorMPC561
Bosch part / software1037390530Offset in the file: 0x040010
Bosch project identifier (EPK)99/1/EDC16CP33/015/C344Offset in the file: 0x1C034E

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16CP33 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 8200666516 and software number 1037390530. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16CP33

HardwareSoftwareVehicles
82006665161037382400Opel Vivaro
82006665161037388188Opel Vivaro
82006665161037388189Nissan PRIMASTAR
82006665161037388191Renault Traffic II
82006665168200834057Renault Trafic 2006 Turbodiesel 83.8KWKW
82006877271037382396Renault Espace
82006877291037382397Renault Espace
82006884941037387304Renault Megane II

Bosch EDC16CP33 original files

The Bosch EDC16CP33 unit page