Original file

Audi 3.0TDI 2009y Bosch EDC16CP34 4E0910402G / 1037384620

An original (stock) flash read of the Bosch EDC16CP34 control unit, fitted in Audi 3.0TDI 2009y, hardware number 4E0910402G and software number 1037384620, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi 3.0TDI 2009y3.0 diesel 232KW
Control unit
Bosch EDC16CP34
Read type
Full read (boot area included)
File
2,048.00 KB · Flash with its EEPROM
Hardware number
4E0910402G
Software number
1037384620

Technical data

Vehicle
BrandAudi
Car model3.0TDI 2009y
Engine3.0 diesel 232KW
Control unit
Control unitBosch EDC16CP34
ECU makerBosch
Hardware number4E0910402G
Software number1037384620
File
File typeOriginal flash read with its EEPROM
File size2,048.00 KB (2,097,152 bytes)
From the file nameAudi 232KW 2009y EDC16CP34 0030
File key4c7ec767b0acce98
Identification read from the file
ECU nameEDC16CP34
Read typeFull read (boot area included)
ProcessorMPC564
Bosch part / software1037384620Offset in the file: 0x040010

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16CP34 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4E0910402G and software number 1037384620. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16CP34

HardwareSoftwareVehicles
4E0910401H1037375255Audi A8
4E0910401J1037372121Audi A8 3.0 TDI, Audi A8
4E0910401J1037372485Audi A8
4E0910401K1037372122Audi A8
4E1907409A1037382247Audi A8, Audi A8 -, Audi A8 4.2 TDI CR DPF V8 Quattro
4E1907409A1037389870Audi A8, Audi A8 4.2 TDI
4E1907409A1037392905Audi A8, Audi A8 4.2 TDI
4E1907409A1037392949Audi A8 4.2 TDI

Bosch EDC16CP34 original files

The Bosch EDC16CP34 unit page