Original file

BMW E81 E87 2.0d 2004 Bosch EDC16CP35 0281011415 / 1037372781

An original (stock) flash read of the Bosch EDC16CP35 control unit, fitted in BMW E81 E87 2.0d 2004, hardware number 0281011415 and software number 1037372781, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW E81 E87 2.0d 20042.0
Control unit
Bosch EDC16CP35
Read type
Full read (boot area included)
File
2,560.00 KB · Flash
Hardware number
0281011415
Software number
1037372781
Vehicle maker's hardware number
7797452

Technical data

Vehicle
BrandBMW
Car modelE81 E87 2.0d 2004
Engine2.0
FuelDiesel
Control unit
Control unitBosch EDC16CP35
ECU makerBosch
Hardware number0281011415
Software number1037372781
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
From the file nameBMW E81 E87 2004 Turbo
File key6750cbefdf3043a4
Identification read from the file
ECU nameEDC16CP35
Read typeFull read (boot area included)
ProcessorMPC563
Bosch part / software0281011415 / 1037372781Offset in the file: 0x000000 / 0x038010
Vehicle maker's hardware number7797452Offset in the file: 0x00847E

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16CP35 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281011415 and software number 1037372781. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16CP35

Bosch EDC16CP35 original files

The Bosch EDC16CP35 unit page