Original file

BMW E71 X5 Bosch EDC16CP35 0281815240 / 1037500775

An original (stock) flash read of the Bosch EDC16CP35 control unit, fitted in BMW E71 X5, hardware number 0281815240 and software number 1037500775, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW E71 X53.0 · 235.0PS / 172.8kW
Control unit
Bosch EDC16CP35
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0281815240
Software number
1037500775

Technical data

Vehicle
BrandBMW
Car modelE71 X5
Engine3.0
FuelDiesel
Power235.0PS / 172.8kW
Control unit
Control unitBosch EDC16CP35
ECU makerBosch
Hardware number0281815240
Software number1037500775
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameBMW E71 X5 3.0 BOSCH
File key20a7f7b9b581013e
Identification read from the file
ECU nameEDC16CP35
Read typeCalibration only (data set)
Bosch part / software1037500775Offset in the file: 0x0C0010
Bosch project identifier (EPK)99/1/EDC16CP35/011/390Offset in the file: 0x0C06C2

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16CP35 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281815240 and software number 1037500775. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16CP35

HardwareSoftwareVehicles
02810152411037390902BMW E60/E61, BMW E70, BMW E90/E91/ E92/E93
02810152411037500776BMW E71, BMW X5, BMW X5 X5-3.0SD
02810166391037500775BMW X5, BMW X6, BMW E70/E71
02810166401037500776BMW X5, BMW 3er, BMW E70
O_012T811037390002BMW X3
O_016T811037390002BMW E90/E91/ E92/E93, BMW E90/E91
O_01WT811037390002BMW E60/E61, BMW 5er
O_022T811037390002BMW X3, BMW E83

Bosch EDC16CP35 original files

The Bosch EDC16CP35 unit page