Original file

BMW X3 Bosch EDC16CP35 O_342T74 / 1037390108

An original (stock) flash read of the Bosch EDC16CP35 control unit, fitted in BMW X3, hardware number O_342T74 and software number 1037390108, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW X33.0 218PS
Control unit
Bosch EDC16CP35
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
O_342T74
Software number
1037390108
Vehicle maker's hardware number
7808205

Technical data

Vehicle
BrandBMW
Car modelX3
Engine3.0 218PS
FuelDiesel
Control unit
Control unitBosch EDC16CP35
ECU makerBosch
Hardware numberO_342T74
Software number1037390108
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyee45fcbf0a3791d4
Identification read from the file
ECU nameEDC16CP35
Read typeFull read (boot area included)
ProcessorMPC563
Bosch part / software1037390108Offset in the file: 0x040010
Vehicle maker's hardware number7808205Offset in the file: 0x01047E
Bosch project identifier (EPK)99/1/EDC16CP35/011/390Offset in the file: 0x0C06C2

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16CP35 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number O_342T74 and software number 1037390108. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16CP35

HardwareSoftwareVehicles
O_322T741037390108BMW X3, BMW E83
O_32BT851037390902BMW E90/E91/ E92/E93, BMW E60/E61, BMW E92
O_336T741037390108BMW
O_33WS821037381343BMW E60/E61
O_34BT861037397536BMW E90/E91/ E92/E93, BMW 3er, BMW E92-E93
O_38BT871037500776BMW 3er, BMW E90/E91/ E92/E93, BMW E90/E91
O_38DT671037387339BMW X3, BMW E83 X3 3.0SD 2009, BMW E90 E91 E92 E93
O_416T471037383495BMW E90/E91/ E92/E93, BMW E92, BMW 3er

Bosch EDC16CP35 original files

The Bosch EDC16CP35 unit page