Original file

Mercedes-Benz S320 CDI Bosch EDC16CP36 CR5-642-81V1-221WA_2LK-173KW4x4-BS24EBAQ-058 / 1037393811

An original (stock) flash read of the Bosch EDC16CP36 control unit, fitted in Mercedes-Benz S320 CDI, hardware number CR5-642-81V1-221WA_2LK-173KW4x4-BS24EBAQ-058 and software number 1037393811, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz S320 CDI3.0 diesel 224PS
Control unit
Bosch EDC16CP36
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
CR5-642-81V1-221WA_2LK-173KW4x4-BS24EBAQ-058
Software number
1037393811

Technical data

Vehicle
BrandMercedes-Benz
Car modelS320 CDI
Engine3.0 diesel 224PS
Control unit
Control unitBosch EDC16CP36
ECU makerBosch
Hardware numberCR5-642-81V1-221WA_2LK-173KW4x4-BS24EBAQ-058
Software number1037393811
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keycda851cd704380e5
Identification read from the file
ECU nameEDC16CP36
Read typeFull read (boot area included)
ProcessorMPC563
Bosch part / software1037393811Offset in the file: 0x040010
Bosch project identifier (EPK)99/1/EDC16CP36/001/P380Offset in the file: 0x1802BD

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16CP36 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR5-642-81V1-221WA_2LK-173KW4x4-BS24EBAQ-058 and software number 1037393811. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16CP36

Bosch EDC16CP36 original files

The Bosch EDC16CP36 unit page