Original file

Ford Mondeo Bosch EDC16CP39 8G91-12K532-EP / 1037501058

An original (stock) flash read of the Bosch EDC16CP39 control unit, fitted in Ford Mondeo, hardware number 8G91-12K532-EP and software number 1037501058, 2,572.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Mondeo2.2 diesel 175PS
Control unit
Bosch EDC16CP39
Read type
Full read (boot area included)
File
2,572.00 KB · Flash
Hardware number
8G91-12K532-EP
Software number
1037501058
Bosch part / software
1037508820
Vehicle maker's hardware number
8G91-12A650-EL
Software / calibration
6G91-14C558-AC

Technical data

Vehicle
BrandFord
Car modelMondeo
Engine2.2 diesel 175PS
Power175.0PS / 128.7kW
Control unit
Control unitBosch EDC16CP39
ECU makerBosch
Hardware number8G91-12K532-EP
Software number1037501058
File
File typeOriginal flash read
File size2,572.00 KB (2,633,728 bytes)
From the file nameFord Mondeo 2.2 TDCi 2009
File keyee69c1c3a893e6a9
Identification read from the file
ECU nameEDC16CP39
Read typeFull read (boot area included)
ProcessorMPC564
Bosch part / software1037508820Offset in the file: 0x006010
Vehicle maker's hardware number8G91-12A650-ELOffset in the file: 0x0C2E80
Software / calibration6G91-14C558-ACOffset in the file: 0x0BFDED

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16CP39 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 8G91-12K532-EP and software number 1037501058. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16CP39

HardwareSoftwareVehicles
8G91-12K532-EG1037396920Ford Mondeo 2.2 TDCi, Ford Mondeo
8G91-12K532-EK1037400399Ford Mondeo
8G91-12K532-EL1037501058Ford Mondeo, Ford Mondeo 2.2 TDCi
8G91-12K532-EN1037500349Ford Mondeo
8G91-12K532-EP1037508820Ford Mondeo, Ford Mondeo 2.2 TDCi
8G91-12K532-ER1037500349Ford Mondeo 2.2TDCI
8G91-12K532-ER1037527215Ford Mondeo
8G91-14C588-FA1037500348Ford S-Max, Ford S MAx, Ford Galaxy

Bosch EDC16CP39 original files

The Bosch EDC16CP39 unit page