Original file

Nissan Navara Bosch EDC16CP42 5X2005X28D / 1037503135

An original (stock) flash read of the Bosch EDC16CP42 control unit, fitted in Nissan Navara, hardware number 5X2005X28D and software number 1037503135, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Nissan Navara3.0 diesel · 231.0PS / 169.9kW
Control unit
Bosch EDC16CP42
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
5X2005X28D
Software number
1037503135

Technical data

Vehicle
BrandNissan
Car modelNavara
Engine3.0 diesel
Power231.0PS / 169.9kW
Control unit
Control unitBosch EDC16CP42
ECU makerBosch
Hardware number5X2005X28D
Software number1037503135
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyc6fddd9458731040
Identification read from the file
ECU nameEDC16CP42
Read typeFull read (boot area included)
ProcessorMPC564
Bosch part / software1037503135Offset in the file: 0x040010
Bosch project identifier (EPK)99/1/EDC16CP42/015/C705Offset in the file: 0x1B03C6

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16CP42 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 5X2005X28D and software number 1037503135. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16CP42

HardwareSoftwareVehicles
1BY001DR6E1037513735Infiniti FX
1BY003EV1B1037513735Infiniti QX70
237103124R1037503120Renault Latitude
4F0907401C1037512631Audi A6
5X2006X60A1037535098Nissan Pathfinder
5X2006X62A1037535037Nissan Navara
5X2006X62A1037535099Nissan Navara
5X2007X00D1037531791Nissan Pathfinder

Bosch EDC16CP42 original files

The Bosch EDC16CP42 unit page