Original file

Audi A4 B7 2.0TDI Bosch EDC16U31 0281012267 / 1037390981

An original (stock) flash read of the Bosch EDC16U31 control unit, fitted in Audi A4 B7 2.0TDI, hardware number 0281012267 and software number 1037390981, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A4 B7 2.0TDI2.0 diesel
Control unit
Bosch EDC16U31
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
0281012267
Software number
1037390981
Vehicle maker's hardware number
03G906016GN

Technical data

Vehicle
BrandAudi
Car modelA4 B7 2.0TDI
Engine2.0 diesel
Control unit
Control unitBosch EDC16U31
ECU makerBosch
Hardware number0281012267
Software number1037390981
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameAudi A4 B7
File keyeae53fd90aab301d
Identification read from the file
ECU nameEDC16U31
Read typeFull read (boot area included)
ProcessorMPC563
Bosch part / software1037390981Offset in the file: 0x040010
Vehicle maker's hardware number03G906016GNOffset in the file: 0x1C0C92
Software / calibration03G906016GN · version 9618Offset in the file: 0x1C0CA6
Engine descriptionR4 2,0L EDCOffset in the file: 0x1C0CB8

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16U31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281012267 and software number 1037390981. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16U31

HardwareSoftwareVehicles
02810122671037375700Audi A4
02810122671037376314Audi A4 2.0 TDI PD
02810122671037378330Audi A4 2.0 TDI PD
02810122671037383294Audi A4
02810122681037375991Audi A4
02810124821037374282Volkswagen
02810124831037374283Volkswagen
02810125351037377307Mitsubishi Grandis

Bosch EDC16U31 original files

The Bosch EDC16U31 unit page