Original file

Audi A6 2.0TDI Bosch EDC16U31 0281014261 / 1037393546

An original (stock) flash read of the Bosch EDC16U31 control unit, fitted in Audi A6 2.0TDI, hardware number 0281014261 and software number 1037393546, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A6 2.0TDI2.0 diesel 140HP
Control unit
Bosch EDC16U31
Read type
Full read (boot area included)
File
2,048.00 KB · Flash with its EEPROM
Hardware number
0281014261
Software number
1037393546
Vehicle maker's hardware number
03G906016MH

Technical data

Vehicle
BrandAudi
Car modelA6 2.0TDI
Engine2.0 diesel 140HP
Control unit
Control unitBosch EDC16U31
ECU makerBosch
Hardware number0281014261
Software number1037393546
File
File typeOriginal flash read with its EEPROM
File size2,048.00 KB (2,097,152 bytes)
From the file nameA6
File keye81f4fac9807cfea
Identification read from the file
ECU nameEDC16U31
Read typeFull read (boot area included)
ProcessorMPC563
Bosch part / software1037393546Offset in the file: 0x040010
Vehicle maker's hardware number03G906016MHOffset in the file: 0x1C0CBE
Software / calibration03G906016MH · version 1144Offset in the file: 0x1C0CD2
Engine descriptionR4 2,0L EDCOffset in the file: 0x1C0CE4

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16U31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281014261 and software number 1037393546. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16U31

HardwareSoftwareVehicles
02810141081037384821Mitsubishi Outlander 20DiD
02810141081037390125Mitsubishi outlander 2.0DI D
02810142511037390622Volkswagen Transporter 5 pd R5
02810142541037393510Volkswagen T5 BRS DPF
0281014261393546Audi A6 2.0TDI
02810142641037389266Chrysler Sebring
02810142651037389265Dodge Avanger
02810145771037395433Dodge Journey

Bosch EDC16U31 original files

The Bosch EDC16U31 unit page