Original file

Audi Bosch EDC16U31 03G906016GG / 1037380200

An original (stock) flash read of the Bosch EDC16U31 control unit, fitted in Audi, hardware number 03G906016GG and software number 1037380200, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi
Control unit
Bosch EDC16U31
Read type
Full read (boot area included)
File
2,560.00 KB · Flash
Hardware number
03G906016GG
Software number
1037380200

Technical data

Vehicle
BrandAudi
Control unit
Control unitBosch EDC16U31
ECU makerBosch
Hardware number03G906016GG
Software number1037380200
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File keyccedd9a65efe5138
Identification read from the file
ECU nameEDC16U31
Read typeFull read (boot area included)
ProcessorMPC563
Bosch part / software1037380200Offset in the file: 0x040010
Vehicle maker's hardware number03G906016GGOffset in the file: 0x1C0C92
Software / calibration03G906016GG · version 8703Offset in the file: 0x1C0CA6
Engine descriptionR4 2,0L EDCOffset in the file: 0x1C0CB8

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16U31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03G906016GG and software number 1037380200. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16U31

HardwareSoftwareVehicles
03G906016GC1037399837Audi A6 2.0 TDI PD, Audi A4 2.0 TDI PD, Audi A6
03G906016GD1037380419Audi A4, Audi A4 1.9 TDI, Audi A4 1.9TDI
03G906016GD1037383060Audi A4, Audi A4 B7, Audi A4 1.9 TDI PD
03G906016GD1037392909Audi A4, Audi A4 1.9 TDI PD, Audi A4 PD 2008 KW
03G906016GG1037382717Audi
03G906016GK1037378846Volkswagen Sharan
03G906016GK1037381820Volkswagen Sharan
03G906016GK1037387086Volkswagen Sharan

Bosch EDC16U31 original files

The Bosch EDC16U31 unit page