Original file

Audi Bosch EDC16U31 03G906016JF / 1037383704

An original (stock) flash read of the Bosch EDC16U31 control unit, fitted in Audi, hardware number 03G906016JF and software number 1037383704, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi
Control unit
Bosch EDC16U31
Read type
Full read (boot area included)
File
2,560.00 KB · Flash
Hardware number
03G906016JF
Software number
1037383704

Technical data

Vehicle
BrandAudi
Control unit
Control unitBosch EDC16U31
ECU makerBosch
Hardware number03G906016JF
Software number1037383704
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File key31373ffd303cf8fd
Identification read from the file
ECU nameEDC16U31
Read typeFull read (boot area included)
ProcessorMPC563
Bosch part / software1037383704Offset in the file: 0x040010
Vehicle maker's hardware number03G906016JFOffset in the file: 0x1C0CBE
Software / calibration03G906016JF · version 0494Offset in the file: 0x1C0CD2
Engine descriptionR4 2,0L EDCOffset in the file: 0x1C0CE4

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16U31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03G906016JF and software number 1037383704. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16U31

Bosch EDC16U31 original files

The Bosch EDC16U31 unit page