Original file

Audi Bosch EDC16U31 03G906016LN / 1037383042

An original (stock) flash read of the Bosch EDC16U31 control unit, fitted in Audi, hardware number 03G906016LN and software number 1037383042, 2,560.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi
Control unit
Bosch EDC16U31
Read type
Full read (boot area included)
File
2,560.00 KB · Flash
Hardware number
03G906016LN
Software number
1037383042

Technical data

Vehicle
BrandAudi
Control unit
Control unitBosch EDC16U31
ECU makerBosch
Hardware number03G906016LN
Software number1037383042
File
File typeOriginal flash read
File size2,560.00 KB (2,621,440 bytes)
File key9c5fa2b729368f76
Identification read from the file
ECU nameEDC16U31
Read typeFull read (boot area included)
ProcessorMPC563
Bosch part / software1037383042Offset in the file: 0x040010
Vehicle maker's hardware number03G906016LNOffset in the file: 0x1C0CAE
Software / calibration03G906016LN · version 9230Offset in the file: 0x1C0CC2
Engine descriptionR4 2,0L EDCOffset in the file: 0x1C0CD4

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC16U31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03G906016LN and software number 1037383042. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC16U31

HardwareSoftwareVehicles
03G906016LK1037382660Audi A4
03G906016LK1037391504Audi A4
03G906016LL1037381364Audi A4 cabrio
03G906016LL1037391542Audi A4
03G906016LP1037390149Audi A4 1.9 TDI DPF - 116hp, Audi A4 1.9 TDI
03G906016LP1037392908Audi A4
03G906016LQ1037382461Audi A4, Audi A3 2.0 TDI PD, Audi A4 2.0 TDI PD
03G906016LQ1037386349Audi A4, Audi A4 2.0TDI DPF, Audi A4 2000

Bosch EDC16U31 original files

The Bosch EDC16U31 unit page