Original file

Jaguar XF 2017y 2.0D Bosch EDC17 HX73-12C520-FJA / 10SW014675

An original (stock) flash read of the Bosch EDC17 control unit, fitted in Jaguar XF 2017y 2.0D, hardware number HX73-12C520-FJA and software number 10SW014675, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jaguar XF 2017y 2.0D2.0
Control unit
Bosch EDC17
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
HX73-12C520-FJA
Software number
10SW014675
Bosch part / software
10SW012584
Software / calibration
GX73-12B684-FAB

Technical data

Vehicle
BrandJaguar
Car modelXF 2017y 2.0D
Engine2.0
Control unit
Control unitBosch EDC17
ECU makerBosch
Hardware numberHX73-12C520-FJA
Software number10SW014675
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
From the file nameJaguar XF 2017y
File key9d3bf4b48ff5dcc9
Identification read from the file
ECU nameMEDC17.9
Read typeOBD read (no boot area)
ProcessorTC1793
Bosch part / software10SW012584Offset in the file: 0x02001A
Software / calibrationGX73-12B684-FABOffset in the file: 0x00FD00
Engine descriptionHX73-14C204-FJAOffset in the file: 0x1FFF02
Bosch project identifier (EPK)47/1/MEDC17_9/190/P1226//P1226C244_3_20_CONT///Offset in the file: 0x043464

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number HX73-12C520-FJA and software number 10SW014675. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17

Bosch EDC17 original files