Original file

Jaguar F-Pace Bosch EDC17 JK83-12K532-GBF / 10SW042425

An original (stock) flash read of the Bosch EDC17 control unit, fitted in Jaguar F-Pace, hardware number JK83-12K532-GBF and software number 10SW042425, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jaguar F-Pace2.0 · 180.0PS / 132.4kW
Control unit
Bosch EDC17
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
JK83-12K532-GBF
Software number
10SW042425

Technical data

Vehicle
BrandJaguar
Car modelF-Pace
Engine2.0
FuelDiesel
Power180.0PS / 132.4kW
Control unit
Control unitBosch EDC17
ECU makerBosch
Hardware numberJK83-12K532-GBF
Software number10SW042425
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key537faf44300b586d
Identification read from the file
ECU nameMEDC17.9
Read typeCalibration only (data set)
Bosch part / software10SW042425Offset in the file: 0x02001A
Bosch project identifier (EPK)42/1/MEDC17_9/190/P1226//P1226C352_3_60///Offset in the file: 0x020078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number JK83-12K532-GBF and software number 10SW042425. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17

Bosch EDC17 original files