Original file

Land Rover Range Rover Evoque Bosch EDC17 K8D2-12K532-FBF / 10SW046695

An original (stock) flash read of the Bosch EDC17 control unit, fitted in Land Rover Range Rover Evoque, hardware number K8D2-12K532-FBF and software number 10SW046695, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Land Rover Range Rover Evoque2.0 diesel 180PS
Control unit
Bosch EDC17
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
K8D2-12K532-FBF
Software number
10SW046695

Technical data

Vehicle
BrandLand Rover
Car modelRange Rover Evoque
Engine2.0 diesel 180PS
Power180PS / 132.4kW
Control unit
Control unitBosch EDC17
ECU makerBosch
Hardware numberK8D2-12K532-FBF
Software number10SW046695
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key7303df13cfa5305b
Identification read from the file
ECU nameMEDC17.9
Read typeFull read (boot area included)
Bosch part / software10SW046695Offset in the file: 0x02001A
Bosch project identifier (EPK)50/1/MEDC17_9/190/P1226//P1226C481_FR_MHEV_3_60///Offset in the file: 0x0C0130

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number K8D2-12K532-FBF and software number 10SW046695. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17

HardwareSoftwareVehicles
K8A2-12K532-FCEK8A2-12K532-FCELand Rover Velar
K8A2-12K532-FCF10SW046482Land Rover Velar
K8A2-12K532-FCFK8A2-12K532-FCFLand Rover Range Rover Velar
K8A2-12K532-FCG10SW060675Land Rover Velar
K8D2-12K532-FBS10SW071307Land Rover Range Rover Evoque
K8D2-12K532-FCJ10SW052822Land Rover Range Rover Evoque
K8D2-12K532-FCT10SW072839Land Rover Range Rover Evoque, Land Rover Evoque 2.0D 2019y, Rover
K8D2-12K532-FCU10SW079549Land Rover Range Rover Evoque, Land Rover Evoque, Rover

Bosch EDC17 original files