Original file

Hyundai I30 2010 1.6CRDI Bosch EDC17C08 0281017207 / 1037508161

An original (stock) flash read of the Bosch EDC17C08 control unit, fitted in Hyundai I30 2010 1.6CRDI, hardware number 0281017207 and software number 1037508161, 1,504.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Hyundai I30 2010 1.6CRDI1.6 diesel 90HP
Control unit
Bosch EDC17C08
Read type
Full read (boot area included)
File
1,504.00 KB · Flash with its EEPROM
Hardware number
0281017207
Software number
1037508161
Vehicle maker's hardware number
39115-2A411

Technical data

Vehicle
BrandHyundai
Car modelI30 2010 1.6CRDI
Engine1.6 diesel 90HP
Control unit
Control unitBosch EDC17C08
ECU makerBosch
Hardware number0281017207
Software number1037508161
File
File typeOriginal flash read with its EEPROM
File size1,504.00 KB (1,540,096 bytes)
From the file nameHyundai I30 2010 90HP
File key34a1803f1178af74
Identification read from the file
ECU nameEDC17C08
Read typeFull read (boot area included)
ProcessorTC1766
Bosch part / software1037508161Offset in the file: 0x02001A
Vehicle maker's hardware number39115-2A411Offset in the file: 0x103958
Bosch project identifier (EPK)39/1/EDC17_C08/147/P_610//P_610_VA1A///Offset in the file: 0x0320CC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C08 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281017207 and software number 1037508161. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C08

HardwareSoftwareVehicles
1037527181Kia
02810154971037398316Hyundai i20
02810164261037502415Kia Soul
02810166761037508136Hyundai IX35
02810172171037514150Kia ceed 2011y
02810184921037522449Hyundai I40
02810193601037526076Kia Ceed
02810195361037554598Hyundai Seasall

Bosch EDC17C08 original files

The Bosch EDC17C08 unit page