Original file

Hyundai IX20 Bosch EDC17C08 39140-2A013 / 1037544527

An original (stock) flash read of the Bosch EDC17C08 control unit, fitted in Hyundai IX20, hardware number 39140-2A013 and software number 1037544527, 1,504.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Hyundai IX201.6 diesel
Control unit
Bosch EDC17C08
Read type
Calibration only (data set)
File
1,504.00 KB · Flash
Hardware number
39140-2A013
Software number
1037544527

Technical data

Vehicle
BrandHyundai
Car modelIX20
Engine1.6 diesel
Control unit
Control unitBosch EDC17C08
ECU makerBosch
Hardware number39140-2A013
Software number1037544527
File
File typeOriginal flash read
File size1,504.00 KB (1,540,096 bytes)
File keycc8b8f6e50891e66
Identification read from the file
ECU nameEDC17C08
Read typeCalibration only (data set)
Bosch part / software1037544527Offset in the file: 0x00401A
Vehicle maker's hardware number39140-2A013Offset in the file: 0x103028
Bosch project identifier (EPK)39/1/EDC17_C08/147/P_610//P_610_VD4A///Offset in the file: 0x120078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C08 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 39140-2A013 and software number 1037544527. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C08

Bosch EDC17C08 original files

The Bosch EDC17C08 unit page