Original file

Hyundai i30 Bosch EDC17C08 D4VF5WLMCVEHIA1U / 1037522449

An original (stock) flash read of the Bosch EDC17C08 control unit, fitted in Hyundai i30, hardware number D4VF5WLMCVEHIA1U and software number 1037522449, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Hyundai i301.7 diesel · 136.0PS / 100.0kW
Control unit
Bosch EDC17C08
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
D4VF5WLMCVEHIA1U
Software number
1037522449
Vehicle maker's hardware number
39120-2A209

Technical data

Vehicle
BrandHyundai
Car modeli30
Engine1.7 diesel
Power136.0PS / 100.0kW
Control unit
Control unitBosch EDC17C08
ECU makerBosch
Hardware numberD4VF5WLMCVEHIA1U
Software number1037522449
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key681d4f21f8ecbfb6
Identification read from the file
ECU nameEDC17C08
Read typeCalibration only (data set)
Bosch part / software1037522449Offset in the file: 0x12001A
Vehicle maker's hardware number39120-2A209Offset in the file: 0x103054
Bosch project identifier (EPK)39/1/EDC17_C08/147/P_610//P_610_VD4A///Offset in the file: 0x120078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C08 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number D4VF5WLMCVEHIA1U and software number 1037522449. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C08

Bosch EDC17C08 original files

The Bosch EDC17C08 unit page