Original file

Peugeot 308 Bosch EDC17C10 0200171621 / 1037528712

An original (stock) flash read of the Bosch EDC17C10 control unit, fitted in Peugeot 308, hardware number 0200171621 and software number 1037528712, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Peugeot 308petrol
Control unit
Bosch EDC17C10
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0200171621
Software number
1037528712
Software / calibration
P_858_H113a2

Technical data

Vehicle
BrandPeugeot
Car model308
Enginepetrol
Control unit
Control unitBosch EDC17C10
ECU makerBosch
Hardware number0200171621
Software number1037528712
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key159e3c3d644d304e
Identification read from the file
ECU nameEDC17C10
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037528712Offset in the file: 0x02001A
Software / calibrationP_858_H113a2Offset in the file: 0x03EA20
Bosch project identifier (EPK)41/1/EDC17_C10/126/P_858//P_858_H113a2///Offset in the file: 0x03EA20

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0200171621 and software number 1037528712. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C10

Bosch EDC17C10 original files

The Bosch EDC17C10 unit page