Original file

Peugeot Bosch EDC17C10 0200171976 / 1037535677

An original (stock) flash read of the Bosch EDC17C10 control unit, fitted in Peugeot, hardware number 0200171976 and software number 1037535677, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Peugeot1.0 diesel
Control unit
Bosch EDC17C10
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0200171976
Software number
1037535677
Software / calibration
P_858_H115c

Technical data

Vehicle
BrandPeugeot
Engine1.0 diesel
Control unit
Control unitBosch EDC17C10
ECU makerBosch
Hardware number0200171976
Software number1037535677
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key780a5cec5466c07e
Identification read from the file
ECU nameEDC17C10
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037535677Offset in the file: 0x02001A
Software / calibrationP_858_H115cOffset in the file: 0x03EADC
Bosch project identifier (EPK)40/1/EDC17_C10/126/P_858//P_858_H115c///Offset in the file: 0x03EADC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0200171976 and software number 1037535677. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C10

HardwareSoftwareVehicles
02001716211037528712Peugeot 308
02001717171037535677Peugeot 308
02001718191037535539Citroën DS3
0200171841344231037535677Peugeot 2008
02001722231037535677Peugeot 308
02001723031037535539Fiat Scudo II
02012082081037517838Peugeot 208
02810158471037506830Peugeot 308

Bosch EDC17C10 original files

The Bosch EDC17C10 unit page