Original file

Fiat Scudo II Bosch EDC17C10 0200172303 / 1037535539

An original (stock) flash read of the Bosch EDC17C10 control unit, fitted in Fiat Scudo II, hardware number 0200172303 and software number 1037535539, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat Scudo II1.6 diesel 90PS
Control unit
Bosch EDC17C10
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0200172303
Software number
1037535539
Software / calibration
P_858_H113c

Technical data

Vehicle
BrandFiat
Car modelScudo II
Engine1.6 diesel 90PS
Power90.0PS / 66.2kW
Control unit
Control unitBosch EDC17C10
ECU makerBosch
Hardware number0200172303
Software number1037535539
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keye074aa2948b1e278
Identification read from the file
ECU nameEDC17C10
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037535539Offset in the file: 0x02001A
Software / calibrationP_858_H113cOffset in the file: 0x03EB44
Bosch project identifier (EPK)40/1/EDC17_C10/126/P_858//P_858_H113c///Offset in the file: 0x03EB44

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0200172303 and software number 1037535539. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C10

HardwareSoftwareVehicles
02001718191037535539Citroën DS3
0200171841344231037535677Peugeot 2008
02001719761037535677Peugeot
02001722231037535677Peugeot 308
02012082081037517838Peugeot 208
02810158471037506830Peugeot 308
02810158481037506849Citroën DS3
02810158481037507269Citroën C3

Bosch EDC17C10 original files

The Bosch EDC17C10 unit page