Original file

Peugeot Partner Turbo Diesel 66.2KWKW Bosch EDC17C10 0281017334 / 1037512116

An original (stock) flash read of the Bosch EDC17C10 control unit, fitted in Peugeot Partner Turbo Diesel 66.2KWKW, hardware number 0281017334 and software number 1037512116, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Peugeot Partner Turbo Diesel 66.2KWKW1.6 diesel · 90.0PS / 66.2kW
Control unit
Bosch EDC17C10
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0281017334
Software number
1037512116
Software / calibration
P_858_H92e

Technical data

Vehicle
BrandPeugeot
Car modelPartner Turbo Diesel 66.2KWKW
Engine1.6 diesel
Power90.0PS / 66.2kW
Control unit
Control unitBosch EDC17C10
ECU makerBosch
Hardware number0281017334
Software number1037512116
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file namePeugeot Partner 1.6 HDI Turbo
File keyf79d5d89df8a63f8
Identification read from the file
ECU nameEDC17C10
Read typeCalibration only (data set)
Bosch part / software1037512116Offset in the file: 0x10001A
Software / calibrationP_858_H92eOffset in the file: 0x100A10
Bosch project identifier (EPK)39/1/EDC17_C10/126/P_858//P_858_H92e///Offset in the file: 0x100A10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281017334 and software number 1037512116. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C10

HardwareSoftwareVehicles
02810158481037507269Citroën C3
02810158481037510526Citroën DS3 1.6HDI, Citroën DS3 2010 Turbo Diesel, Citroën DS3
02810158491037510522Peugeot 207 FAP 2010 Turbo, Peugeot 207
02810173331037514415Peugeot 308
02810173351037509805Citroën C4
02810173361037514419Peugeot 207
02810176001037512850Citroën DS3
02810176001037517755Citroën Berlingo

Bosch EDC17C10 original files

The Bosch EDC17C10 unit page