Original file

Peugeot Bosch EDC17C10 0300170405 / 1037514419

An original (stock) flash read of the Bosch EDC17C10 control unit, fitted in Peugeot, hardware number 0300170405 and software number 1037514419, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Peugeot
Control unit
Bosch EDC17C10
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
0300170405
Software number
1037514419
Software / calibration
P_858_H63G2

Technical data

Vehicle
BrandPeugeot
Control unit
Control unitBosch EDC17C10
ECU makerBosch
Hardware number0300170405
Software number1037514419
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyc2073b0d3598b67e
Identification read from the file
ECU nameEDC17C10
Read typeOBD read (no boot area)
ProcessorTC1797
Bosch part / software1037514419Offset in the file: 0x02001A
Software / calibrationP_858_H63G2Offset in the file: 0x03868C
Bosch project identifier (EPK)44/1/EDC17C10_5_10/126/P_858//P_858_H63G2///Offset in the file: 0x03868C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0300170405 and software number 1037514419. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C10

Bosch EDC17C10 original files

The Bosch EDC17C10 unit page