Original file

Peugeot 308 Bosch EDC17C10 858_H63G2 / 1037518475

An original (stock) flash read of the Bosch EDC17C10 control unit, fitted in Peugeot 308, hardware number 858_H63G2 and software number 1037518475, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Peugeot 3081.6 · 92.0PS / 67.7kW
Control unit
Bosch EDC17C10
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
858_H63G2
Software number
1037518475
Software / calibration
P_858_H63G2

Technical data

Vehicle
BrandPeugeot
Car model308
Engine1.6
FuelDiesel
Power92.0PS / 67.7kW
Control unit
Control unitBosch EDC17C10
ECU makerBosch
Hardware number858_H63G2
Software number1037518475
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key801bfbe801944a07
Identification read from the file
ECU nameEDC17C10
Read typeCalibration only (data set)
Bosch part / software1037518475Offset in the file: 0x18001A
Software / calibrationP_858_H63G2Offset in the file: 0x122868
Bosch project identifier (EPK)44/1/EDC17C10_5_10/126/P_858//P_858_H63G2///Offset in the file: 0x122868

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 858_H63G2 and software number 1037518475. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C10

HardwareSoftwareVehicles
858_H113b21037532194Citroën C3
858_H113c1037537571Citroën C4
858_H115c1037539885Peugeot 308
858_H63G21037516425Peugeot 207
858_H921037516406Citroën C4
88765432101037512850Citroën Berlingo
88765432101037516511Citroën Berlingo
88765432101037522348Citroën C4

Bosch EDC17C10 original files

The Bosch EDC17C10 unit page