Original file

Citroën Berlingo Bosch EDC17C10 9666077280 / 010618

An original (stock) flash read of the Bosch EDC17C10 control unit, fitted in Citroën Berlingo, hardware number 9666077280 and software number 010618, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Citroën Berlingo1.6 diesel · 90.0PS / 66.2kW
Control unit
Bosch EDC17C10
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
9666077280
Software number
010618
Bosch part / software
10SW010618
Software / calibration
P_858_H113c

Technical data

Vehicle
BrandCitroën
Car modelBerlingo
Engine1.6 diesel
Power90.0PS / 66.2kW
Control unit
Control unitBosch EDC17C10
ECU makerBosch
Hardware number9666077280
Software number010618
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key9d6eb92c5ec3aa30
Identification read from the file
ECU nameEDC17C10
Read typeCalibration only (data set)
Bosch part / software10SW010618Offset in the file: 0x30001A
Software / calibrationP_858_H113cOffset in the file: 0x302BC0
Bosch project identifier (EPK)40/1/EDC17_C10/126/P_858//P_858_H113c///Offset in the file: 0x302BC0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 9666077280 and software number 010618. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C10

HardwareSoftwareVehicles
88765432101037512850Citroën Berlingo
88765432101037516511Citroën Berlingo
88765432101037522348Citroën C4
88765432101037535539Citroën Berlingo
96660772801037510568Peugeot 308
96660772801037512344Peugeot 207
96660772801037515431Citroën C3
96660772801037516406Citroën C4

Bosch EDC17C10 original files

The Bosch EDC17C10 unit page