Original file

Ford B-Max Bosch EDC17C10 CV11-12A650-DG / 1037530597

An original (stock) flash read of the Bosch EDC17C10 control unit, fitted in Ford B-Max, hardware number CV11-12A650-DG and software number 1037530597, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford B-Max1.6 diesel 95PS
Control unit
Bosch EDC17C10
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
CV11-12A650-DG
Software number
1037530597
Software / calibration
CV21-12B684-EA

Technical data

Vehicle
BrandFord
Car modelB-Max
Engine1.6 diesel 95PS
Power95.0PS / 69.9kW
Control unit
Control unitBosch EDC17C10
ECU makerBosch
Hardware numberCV11-12A650-DG
Software number1037530597
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyf4334c6f09a29355
Identification read from the file
ECU nameEDC17C10
Read typeOBD read (no boot area)
ProcessorTC1797
Bosch part / software1037530597Offset in the file: 0x02001A
Vehicle maker's hardware numberCV11-12A650-DGOffset in the file: 0x00FD30
Software / calibrationCV21-12B684-EAOffset in the file: 0x00FD00
Engine descriptionCV11-14C204-DGOffset in the file: 0x20BF02
Bosch project identifier (EPK)35/1/EDC17_C10/57/P969//P969B720///Offset in the file: 0x0394E4

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CV11-12A650-DG and software number 1037530597. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C10

HardwareSoftwareVehicles
C1B1-14C204-BE1037530633Ford Fiesta, Ford MkVI
C1B1-14C204-CE1037530558Ford Fiesta
C1B1-14C204-TA1037534656Ford Fiesta
C1B1-14C204-UA1037534658Ford Fiesta
CV11-12A650-GA1037534660Ford Fiesta
CV11-14C204-CH1037530608Ford B-Max
CV11-14C204-DF1037523590Ford B-Max
CV11-14C204-DF1037527486Peugeot B-Max, Ford

Bosch EDC17C10 original files

The Bosch EDC17C10 unit page