Original file

Ford B-Max Bosch EDC17C10 CV11-14C204-DF / 1037523590

An original (stock) flash read of the Bosch EDC17C10 control unit, fitted in Ford B-Max, hardware number CV11-14C204-DF and software number 1037523590, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford B-Max1.6 diesel 95PS
Control unit
Bosch EDC17C10
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
CV11-14C204-DF
Software number
1037523590
Bosch part / software
1037527486
Vehicle maker's hardware number
CV11-12A650-DD
Software / calibration
CV21-12B684-EA

Technical data

Vehicle
BrandFord
Car modelB-Max
Engine1.6 diesel 95PS
Control unit
Control unitBosch EDC17C10
ECU makerBosch
Hardware numberCV11-14C204-DF
Software number1037523590
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key0402e46d0181df41
Identification read from the file
ECU nameEDC17C10
Read typeOBD read (no boot area)
ProcessorTC1797
Bosch part / software1037527486Offset in the file: 0x02001A
Vehicle maker's hardware numberCV11-12A650-DDOffset in the file: 0x00FD30
Software / calibrationCV21-12B684-EAOffset in the file: 0x00FD00
Engine descriptionCV11-14C204-DFOffset in the file: 0x20BF02
Bosch project identifier (EPK)35/1/EDC17_C10/57/P969//P969B620///Offset in the file: 0x0390E8

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CV11-14C204-DF and software number 1037523590. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C10

Bosch EDC17C10 original files

The Bosch EDC17C10 unit page