Original file

Ford B-Max Bosch EDC17C10 CV1A-12A650-HD / 1037549709

An original (stock) flash read of the Bosch EDC17C10 control unit, fitted in Ford B-Max, hardware number CV1A-12A650-HD and software number 1037549709, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford B-Max1.6 diesel 95PS
Control unit
Bosch EDC17C10
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
CV1A-12A650-HD
Software number
1037549709
Software / calibration
DA6A-12B684-AB

Technical data

Vehicle
BrandFord
Car modelB-Max
Engine1.6 diesel 95PS
Power95.0PS / 69.9kW
Control unit
Control unitBosch EDC17C10
ECU makerBosch
Hardware numberCV1A-12A650-HD
Software number1037549709
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyc8256be19ae57585
Identification read from the file
ECU nameEDC17C10
Read typeOBD read (no boot area)
ProcessorTC1797
Bosch part / software1037549709Offset in the file: 0x02001A
Vehicle maker's hardware numberCV1A-12A650-HDOffset in the file: 0x00FD30
Software / calibrationDA6A-12B684-ABOffset in the file: 0x00FD00
Engine descriptionCV1A-14C204-HDOffset in the file: 0x20BF02
Bosch project identifier (EPK)35/1/EDC17_C10/57/P969//P969B740///Offset in the file: 0x03958C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CV1A-12A650-HD and software number 1037549709. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C10

Bosch EDC17C10 original files

The Bosch EDC17C10 unit page