Original file

Ford B-max Bosch EDC17C10 CV1A-14C204-FA / 1037534701

An original (stock) flash read of the Bosch EDC17C10 control unit, fitted in Ford B-max, hardware number CV1A-14C204-FA and software number 1037534701, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford B-max95PS
Control unit
Bosch EDC17C10
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
CV1A-14C204-FA
Software number
1037534701
Vehicle maker's hardware number
CV1A-12A650-FA

Technical data

Vehicle
BrandFord
Car modelB-max
Engine95PS
Power95.0PS / 69.9kW
Control unit
Control unitBosch EDC17C10
ECU makerBosch
Hardware numberCV1A-14C204-FA
Software number1037534701
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyd8b3957aa46e05f9
Identification read from the file
ECU nameEDC17C10
Read typeCalibration only (data set)
Bosch part / software1037534701Offset in the file: 0x02001A
Vehicle maker's hardware numberCV1A-12A650-FAOffset in the file: 0x123C2D
Software / calibrationCV1A-14C204-FAOffset in the file: 0x123C11
Bosch project identifier (EPK)35/1/EDC17_C10/57/P969//P969B740///Offset in the file: 0x041420

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CV1A-14C204-FA and software number 1037534701. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C10

Bosch EDC17C10 original files

The Bosch EDC17C10 unit page