Original file

Ford F350 Bosch EDC17C10 CV6Q-12A650-AA / 10SW085296

An original (stock) flash read of the Bosch EDC17C10 control unit, fitted in Ford F350, hardware number CV6Q-12A650-AA and software number 10SW085296, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford F350
Control unit
Bosch EDC17C10
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
CV6Q-12A650-AA
Software number
10SW085296

Technical data

Vehicle
BrandFord
Car modelF350
Control unit
Control unitBosch EDC17C10
ECU makerBosch
Hardware numberCV6Q-12A650-AA
Software number10SW085296
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyd3006727cf723edd
Identification read from the file
ECU nameEDC17CP65
Read typeCalibration only (data set)
Bosch part / software10SW085296Offset in the file: 0x08001A
Vehicle maker's hardware numberCV6Q-12A650-AAOffset in the file: 0x18B989
Bosch project identifier (EPK)38/1/EDC17CP65/57/P1417//P1417_1060///Offset in the file: 0x0801EC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CV6Q-12A650-AA and software number 10SW085296. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C10

Bosch EDC17C10 original files

The Bosch EDC17C10 unit page