Original file

Ford Focus Bosch EDC17C10 CV6Q-14C204-DB / 1037541186

An original (stock) flash read of the Bosch EDC17C10 control unit, fitted in Ford Focus, hardware number CV6Q-14C204-DB and software number 1037541186, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Focus1.6 diesel 105PS
Control unit
Bosch EDC17C10
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
CV6Q-14C204-DB
Software number
1037541186
Vehicle maker's hardware number
CV6Q-12A650-DB

Technical data

Vehicle
BrandFord
Car modelFocus
Engine1.6 diesel 105PS
Power105.0PS / 77.2kW
Control unit
Control unitBosch EDC17C10
ECU makerBosch
Hardware numberCV6Q-14C204-DB
Software number1037541186
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keydeac2d389328bdfe
Identification read from the file
ECU nameEDC17C10
Read typeCalibration only (data set)
Bosch part / software1037541186Offset in the file: 0x22001A
Vehicle maker's hardware numberCV6Q-12A650-DBOffset in the file: 0x32595D
Software / calibrationCV6Q-14C204-DBOffset in the file: 0x325941
Bosch project identifier (EPK)35/1/EDC17_C10/57/P969//P969C670///Offset in the file: 0x242498

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CV6Q-14C204-DB and software number 1037541186. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C10

Bosch EDC17C10 original files

The Bosch EDC17C10 unit page