Original file

Ford Bosch EDC17C10 DA6A-14C204-ME / 1037541288

An original (stock) flash read of the Bosch EDC17C10 control unit, fitted in Ford, hardware number DA6A-14C204-ME and software number 1037541288, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford1.5 diesel 75PS
Control unit
Bosch EDC17C10
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
DA6A-14C204-ME
Software number
1037541288
Bosch part / software
1037549630
Vehicle maker's hardware number
DA6A-12A650-MC
Software / calibration
DA6A-12B684-AB

Technical data

Vehicle
BrandFord
Engine1.5 diesel 75PS
Power75.0PS / 55.2kW
Control unit
Control unitBosch EDC17C10
ECU makerBosch
Hardware numberDA6A-14C204-ME
Software number1037541288
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key38ed941d5db6c423
Identification read from the file
ECU nameEDC17C10
Read typeOBD read (no boot area)
ProcessorTC1797
Bosch part / software1037549630Offset in the file: 0x02001A
Vehicle maker's hardware numberDA6A-12A650-MCOffset in the file: 0x00FD30
Software / calibrationDA6A-12B684-ABOffset in the file: 0x00FD00
Engine descriptionDA6A-14C204-MEOffset in the file: 0x20BF02
Bosch project identifier (EPK)35/1/EDC17_C10/57/P969//P969B740///Offset in the file: 0x03958C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number DA6A-14C204-ME and software number 1037541288. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Ford FiestaFlash4,096.00 KB€15Add to cart
Ford FiestaFlash4,096.00 KB€15Add to cart
Ford FiestaFlash4,096.00 KB€15Add to cart

All reads of DA6A-14C204-ME / 1037541288

Other pairs of Bosch EDC17C10

Bosch EDC17C10 original files

The Bosch EDC17C10 unit page