Original file

Ford Fiesta Bosch EDC17C10 DA6A-14C204-NB / 1037541163

An original (stock) flash read of the Bosch EDC17C10 control unit, fitted in Ford Fiesta, hardware number DA6A-14C204-NB and software number 1037541163, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Fiesta1.6 diesel · 95.0PS / 69.9kW
Control unit
Bosch EDC17C10
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
DA6A-14C204-NB
Software number
1037541163
Vehicle maker's hardware number
DA6A-12A650-NB

Technical data

Vehicle
BrandFord
Car modelFiesta
Engine1.6 diesel
Power95.0PS / 69.9kW
Control unit
Control unitBosch EDC17C10
ECU makerBosch
Hardware numberDA6A-14C204-NB
Software number1037541163
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keye01eb4f5148f8a8c
Identification read from the file
ECU nameEDC17C10
Read typeFull read (boot area included)
Bosch part / software1037541163Offset in the file: 0x04001A
Vehicle maker's hardware numberDA6A-12A650-NBOffset in the file: 0x143C2D
Software / calibrationDA6A-14C204-NBOffset in the file: 0x02BF02
Bosch project identifier (EPK)35/1/EDC17_C10/57/P969//P969B740///Offset in the file: 0x061420

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number DA6A-14C204-NB and software number 1037541163. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C10

Bosch EDC17C10 original files

The Bosch EDC17C10 unit page