Original file

Ford Transit Connect Bosch EDC17C10 ET71-12A650-CE / 1037541328

An original (stock) flash read of the Bosch EDC17C10 control unit, fitted in Ford Transit Connect, hardware number ET71-12A650-CE and software number 1037541328, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Transit Connect1.5 diesel 75PS
Control unit
Bosch EDC17C10
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
ET71-12A650-CE
Software number
1037541328
Software / calibration
DA6A-12B684-AB

Technical data

Vehicle
BrandFord
Car modelTransit Connect
Engine1.5 diesel 75PS
Power75PS / 55.2kW
Control unit
Control unitBosch EDC17C10
ECU makerBosch
Hardware numberET71-12A650-CE
Software number1037541328
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key244a511023573080
Identification read from the file
ECU nameEDC17C10
Read typeOBD read (no boot area)
ProcessorTC1797
Bosch part / software1037541328Offset in the file: 0x02001A
Vehicle maker's hardware numberET71-12A650-CEOffset in the file: 0x00FD30
Software / calibrationDA6A-12B684-ABOffset in the file: 0x00FD00
Engine descriptionET71-14C204-CEOffset in the file: 0x20BF02
Bosch project identifier (EPK)35/1/EDC17_C10/57/P969//P969B821///Offset in the file: 0x03984C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number ET71-12A650-CE and software number 1037541328. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C10

HardwareSoftwareVehicles
DA6A-14C204-PB1037541164Ford Fiesta
DA6A-14C204-PC1037541290Ford Fiesta
DN15-12A650-XD1037538530Ford Ecosport
DN15-12A650-XE1037538783Ford EcoSport, Ford Ecosport
ET71-12A650-EE1037541287Ford Courier
ET71-12A650-FA1037541329Ford Courier 1.5TDCI
ET71-12A650-FF1037541329Ford Transit
ET71-12A650-RC1037549664Ford Transit Connect

Bosch EDC17C10 original files

The Bosch EDC17C10 unit page