Original file

Ford Courier Bosch EDC17C10 ET71-14C204-EG / 1037549704

An original (stock) flash read of the Bosch EDC17C10 control unit, fitted in Ford Courier, hardware number ET71-14C204-EG and software number 1037549704, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Courier1.6 diesel · 95.0PS / 69.9kW
Control unit
Bosch EDC17C10
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
ET71-14C204-EG
Software number
1037549704
Vehicle maker's hardware number
ET71-12A650-EG

Technical data

Vehicle
BrandFord
Car modelCourier
Engine1.6 diesel
Power95.0PS / 69.9kW
Control unit
Control unitBosch EDC17C10
ECU makerBosch
Hardware numberET71-14C204-EG
Software number1037549704
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key54753c5c304dcf9a
Identification read from the file
ECU nameEDC17C10
Read typeFull read (boot area included)
Bosch part / software1037549704Offset in the file: 0x04001A
Vehicle maker's hardware numberET71-12A650-EGOffset in the file: 0x14473B
Software / calibrationET71-14C204-EGOffset in the file: 0x02BF02
Bosch project identifier (EPK)35/1/EDC17_C10/57/P969//P969B821///Offset in the file: 0x061420

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number ET71-14C204-EG and software number 1037549704. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C10

HardwareSoftwareVehicles
ET71-12A650-SF1037560044Ford Transit Courier 2016y
ET71-12A650-TC1037549699Ford Transit Tourneo
ET71-12A650-UC1037549701Ford Courier, Ford Transit
ET71-14C204-EE1037541287Ford Transit Connect, Ford Courier
ET71-14C204-FE1037541117Ford Courier
ET71-14C204-FF1037541117Ford Courier
ET71-14C204-FF1037541329Ford Transit Courier, Ford Fiesta, Ford Transit
ET71-14C204-FG1037549407Ford Courier

Bosch EDC17C10 original files

The Bosch EDC17C10 unit page