Original file

Ford transit tourneo Bosch EDC17C10 ET71-14C204-SB / 1037546151

An original (stock) flash read of the Bosch EDC17C10 control unit, fitted in Ford transit tourneo, hardware number ET71-14C204-SB and software number 1037546151, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford transit tourneo1.5 diesel 75PS
Control unit
Bosch EDC17C10
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
ET71-14C204-SB
Software number
1037546151
Bosch part / software
1037549412
Vehicle maker's hardware number
ET71-12A650-SA
Software / calibration
DA6A-12B684-AB

Technical data

Vehicle
BrandFord
Car modeltransit tourneo
Engine1.5 diesel 75PS
Power75.0PS / 55.2kW
Control unit
Control unitBosch EDC17C10
ECU makerBosch
Hardware numberET71-14C204-SB
Software number1037546151
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key255ade491f2a3713
Identification read from the file
ECU nameEDC17C10
Read typeOBD read (no boot area)
ProcessorTC1797
Bosch part / software1037549412Offset in the file: 0x02001A
Vehicle maker's hardware numberET71-12A650-SAOffset in the file: 0x00FD30
Software / calibrationDA6A-12B684-ABOffset in the file: 0x00FD00
Engine descriptionET71-14C204-SBOffset in the file: 0x20BF02
Bosch project identifier (EPK)35/1/EDC17_C10/57/P969//P969B821///Offset in the file: 0x03984C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number ET71-14C204-SB and software number 1037546151. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C10

HardwareSoftwareVehicles
ET71-14C204-FG1037549407Ford Courier
ET71-14C204-RB1037541328Ford Transit Connect
ET71-14C204-RD1037556264Ford Transit
ET71-14C204-RE1037556264Ford Transit Courier
ET71-14C204-SB1037549412Ford Courier, Ford Transit Courier
ET71-14C204-SC1037549665Ford Courier, Ford Transit Connect
ET71-14C204-SD1037556265Ford Transit courier
ET71-14C204-SE1037558930Ford Transit Connect, Ford Transit Courier, Ford Transit

Bosch EDC17C10 original files

The Bosch EDC17C10 unit page