Original file

Ford Transit courier Bosch EDC17C10 ET71-14C204-SD / 1037556265

An original (stock) flash read of the Bosch EDC17C10 control unit, fitted in Ford Transit courier, hardware number ET71-14C204-SD and software number 1037556265, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Transit courier1.5 diesel 75PS
Control unit
Bosch EDC17C10
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
ET71-14C204-SD
Software number
1037556265
Vehicle maker's hardware number
ET71-12A650-SD

Technical data

Vehicle
BrandFord
Car modelTransit courier
Engine1.5 diesel 75PS
Power75PS / 55.2kW
Control unit
Control unitBosch EDC17C10
ECU makerBosch
Hardware numberET71-14C204-SD
Software number1037556265
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key93c427531fe6c7a7
Identification read from the file
ECU nameEDC17C10
Read typeCalibration only (data set)
Bosch part / software1037556265Offset in the file: 0x02001A
Vehicle maker's hardware numberET71-12A650-SDOffset in the file: 0x12473B
Software / calibrationET71-14C204-SDOffset in the file: 0x12471F
Bosch project identifier (EPK)35/1/EDC17_C10/57/P969//P969B821///Offset in the file: 0x041420

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number ET71-14C204-SD and software number 1037556265. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C10

HardwareSoftwareVehicles
ET71-14C204-RE1037556264Ford Transit Courier
ET71-14C204-SB1037546151Ford transit tourneo
ET71-14C204-SB1037549412Ford Courier, Ford Transit Courier
ET71-14C204-SC1037549665Ford Courier, Ford Transit Connect
ET71-14C204-SE1037558930Ford Transit Connect, Ford Transit Courier, Ford Transit
ET71-14C204-SGET71-14C204-SGFord Transit Connect
ET71-14C204-TB1037546152Ford Transit Connect
ET71-14C204-TC1037549699Ford Conneckt

Bosch EDC17C10 original files

The Bosch EDC17C10 unit page