Original file

Ford Transit Connect Bosch EDC17C10 ET71-14C204-SG / ET71-14C204-SG

An original (stock) flash read of the Bosch EDC17C10 control unit, fitted in Ford Transit Connect, hardware number ET71-14C204-SG and software number ET71-14C204-SG, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Transit Connect1.5 diesel 100PS
Control unit
Bosch EDC17C10
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
ET71-14C204-SG
Software number
ET71-14C204-SG
Bosch part / software
10SW024239
Vehicle maker's hardware number
ET71-12A650-SG

Technical data

Vehicle
BrandFord
Car modelTransit Connect
Engine1.5 diesel 100PS
Control unit
Control unitBosch EDC17C10
ECU makerBosch
Hardware numberET71-14C204-SG
Software numberET71-14C204-SG
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key72dd183b3dfd43ce
Identification read from the file
ECU nameEDC17C10
Read typeCalibration only (data set)
Bosch part / software10SW024239Offset in the file: 0x22001A
Vehicle maker's hardware numberET71-12A650-SGOffset in the file: 0x324751
Software / calibrationET71-14C204-SGOffset in the file: 0x32471F
Bosch project identifier (EPK)35/1/EDC17_C10/57/P969//P969B821///Offset in the file: 0x241420

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number ET71-14C204-SG and software number ET71-14C204-SG. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C10

HardwareSoftwareVehicles
ET71-14C204-SB1037549412Ford Courier, Ford Transit Courier
ET71-14C204-SC1037549665Ford Courier, Ford Transit Connect
ET71-14C204-SD1037556265Ford Transit courier
ET71-14C204-SE1037558930Ford Transit Connect, Ford Transit Courier, Ford Transit
ET71-14C204-TB1037546152Ford Transit Connect
ET71-14C204-TC1037549699Ford Conneckt
ET71-14C204-TG1037560045Ford Tourneo, Ford Tourneo Courier
ET71-14C204-UB1037546149Ford Tourneo

Bosch EDC17C10 original files

The Bosch EDC17C10 unit page