Original file

Ford Tourneo Bosch EDC17C10 ET71-14C204-TG / 1037560045

An original (stock) flash read of the Bosch EDC17C10 control unit, fitted in Ford Tourneo, hardware number ET71-14C204-TG and software number 1037560045, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Tourneo1.6 diesel 95PS
Control unit
Bosch EDC17C10
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
ET71-14C204-TG
Software number
1037560045
Vehicle maker's hardware number
ET71-12A650-FA

Technical data

Vehicle
BrandFord
Car modelTourneo
Engine1.6 diesel 95PS
Power95.0PS / 69.9kW
Control unit
Control unitBosch EDC17C10
ECU makerBosch
Hardware numberET71-14C204-TG
Software number1037560045
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key4d8141d11007ad36
Identification read from the file
ECU nameEDC17C10
Read typeCalibration only (data set)
Bosch part / software1037560045Offset in the file: 0x22001A
Vehicle maker's hardware numberET71-12A650-FAOffset in the file: 0x32473B
Software / calibrationET71-14C204-TGOffset in the file: 0x32471F
Bosch project identifier (EPK)35/1/EDC17_C10/57/P969//P969B821///Offset in the file: 0x241420

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number ET71-14C204-TG and software number 1037560045. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Ford Tourneo CourierFlash4,096.00 KB€15Add to cart

All reads of ET71-14C204-TG / 1037560045

Other pairs of Bosch EDC17C10

HardwareSoftwareVehicles
ET71-14C204-SE1037558930Ford Transit Connect, Ford Transit Courier, Ford Transit
ET71-14C204-SGET71-14C204-SGFord Transit Connect
ET71-14C204-TB1037546152Ford Transit Connect
ET71-14C204-TC1037549699Ford Conneckt
ET71-14C204-UB1037546149Ford Tourneo
ET71-14C204-UB1037549409Ford Transit, Ford Courier
ET71-14C204-UC1037549409Ford Transit Courier
ET71-14C204-UC1037549701Ford Transit Courier

Bosch EDC17C10 original files

The Bosch EDC17C10 unit page