Original file

Ford Tourneo Bosch EDC17C10 ET71-14C204-UB / 1037546149

An original (stock) flash read of the Bosch EDC17C10 control unit, fitted in Ford Tourneo, hardware number ET71-14C204-UB and software number 1037546149, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Tourneo1.6 diesel 95PS
Control unit
Bosch EDC17C10
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
ET71-14C204-UB
Software number
1037546149
Bosch part / software
1037549409
Vehicle maker's hardware number
ET71-12A650-UA
Software / calibration
DA6A-12B684-AB

Technical data

Vehicle
BrandFord
Car modelTourneo
Engine1.6 diesel 95PS
Power95.0PS / 69.9kW
Control unit
Control unitBosch EDC17C10
ECU makerBosch
Hardware numberET71-14C204-UB
Software number1037546149
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyd700a791f5982051
Identification read from the file
ECU nameEDC17C10
Read typeOBD read (no boot area)
ProcessorTC1797
Bosch part / software1037549409Offset in the file: 0x02001A
Vehicle maker's hardware numberET71-12A650-UAOffset in the file: 0x00FD30
Software / calibrationDA6A-12B684-ABOffset in the file: 0x00FD00
Engine descriptionET71-14C204-UBOffset in the file: 0x20BF02
Bosch project identifier (EPK)35/1/EDC17_C10/57/P969//P969B821///Offset in the file: 0x03984C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number ET71-14C204-UB and software number 1037546149. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C10

HardwareSoftwareVehicles
ET71-14C204-SGET71-14C204-SGFord Transit Connect
ET71-14C204-TB1037546152Ford Transit Connect
ET71-14C204-TC1037549699Ford Conneckt
ET71-14C204-TG1037560045Ford Tourneo, Ford Tourneo Courier
ET71-14C204-UB1037549409Ford Transit, Ford Courier
ET71-14C204-UC1037549409Ford Transit Courier
ET71-14C204-UC1037549701Ford Transit Courier
ET71-14C204-UF1037558933Ford Courier, Ford Courier 1.6 TDCI, Ford Tourneo Custom / Connect

Bosch EDC17C10 original files

The Bosch EDC17C10 unit page