Original file
Ford Ecosport Bosch EDC17C10 FN15-12A650-VD / 1037557639
An original (stock) flash read of the Bosch EDC17C10 control unit, fitted in Ford Ecosport, hardware number FN15-12A650-VD and software number 1037557639, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Ford Ecosport1.5 diesel · 100.0PS / 73.5kW
- Control unit
- Bosch EDC17C10
- Read type
- OBD read (no boot area)
- File
- 4,096.00 KB · Flash
- Hardware number
- FN15-12A650-VD
- Software number
- 1037557639
- Software / calibration
- AV21-12B684-HA
Technical data
| Brand | Ford |
|---|---|
| Car model | Ecosport |
| Engine | 1.5 diesel |
| Power | 100.0PS / 73.5kW |
| Control unit | Bosch EDC17C10 |
|---|---|
| ECU maker | Bosch |
| Hardware number | FN15-12A650-VD |
| Software number | 1037557639 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | 044d02352dcd25bf |
| ECU name | EDC17C10 | |
|---|---|---|
| Read type | OBD read (no boot area) | |
| Processor | TC1797 | |
| Bosch part / software | 1037557639 | Offset in the file: 0x02001A |
| Vehicle maker's hardware number | FN15-12A650-VD | Offset in the file: 0x17FF1C |
| Software / calibration | AV21-12B684-HA | Offset in the file: 0x00FD00 |
| Engine description | FN15-14C204-VD | Offset in the file: 0x17FF02 |
| Bosch project identifier (EPK) | 38/1/EDC17_C10/2/P_712//P_712_B123B/// | Offset in the file: 0x03A9DC |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17C10 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number FN15-12A650-VD and software number 1037557639. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17C10
| Hardware | Software | Vehicles |
|---|---|---|
| ET71-14C204-UB | 1037549409 | Ford Transit, Ford Courier |
| ET71-14C204-UC | 1037549409 | Ford Transit Courier |
| ET71-14C204-UC | 1037549701 | Ford Transit Courier |
| ET71-14C204-UF | 1037558933 | Ford Courier, Ford Courier 1.6 TDCI, Ford Tourneo Custom / Connect |
| FN15-12A650-VG | FN15-14C204-VG | Ford Ecosport |
| FS71-12A650-ED | 1037549432 | Ford Mondeo |
| FS71-12A650-FD | 1037549433 | Ford Mondeo |
| FS71-14C204-ED | 1037546060 | Ford Mondeo |