Original file

Ford Ecosport Bosch EDC17C10 FN15-12A650-VG / FN15-14C204-VG

An original (stock) flash read of the Bosch EDC17C10 control unit, fitted in Ford Ecosport, hardware number FN15-12A650-VG and software number FN15-14C204-VG, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Ecosport1.5 diesel · 90.0PS / 66.2kW
Control unit
Bosch EDC17C10
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
FN15-12A650-VG
Software number
FN15-14C204-VG
Bosch part / software
10SW019668
Software / calibration
AV21-12B684-HA

Technical data

Vehicle
BrandFord
Car modelEcosport
Engine1.5 diesel
Power90.0PS / 66.2kW
Control unit
Control unitBosch EDC17C10
ECU makerBosch
Hardware numberFN15-12A650-VG
Software numberFN15-14C204-VG
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyc2da2dd46d090e33
Identification read from the file
ECU nameEDC17C10
Read typeOBD read (no boot area)
ProcessorTC1797
Bosch part / software10SW019668Offset in the file: 0x02001A
Vehicle maker's hardware numberFN15-12A650-VGOffset in the file: 0x17FF1C
Software / calibrationAV21-12B684-HAOffset in the file: 0x00FD00
Engine descriptionFN15-14C204-VGOffset in the file: 0x17FF02
Bosch project identifier (EPK)38/1/EDC17_C10/2/P_712//P_712_B125A///Offset in the file: 0x03AA54

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number FN15-12A650-VG and software number FN15-14C204-VG. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C10

HardwareSoftwareVehicles
ET71-14C204-UC1037549409Ford Transit Courier
ET71-14C204-UC1037549701Ford Transit Courier
ET71-14C204-UF1037558933Ford Courier, Ford Courier 1.6 TDCI, Ford Tourneo Custom / Connect
FN15-12A650-VD1037557639Ford Ecosport
FS71-12A650-ED1037549432Ford Mondeo
FS71-12A650-FD1037549433Ford Mondeo
FS71-14C204-ED1037546060Ford Mondeo
FS71-14C204-ED1037549432Ford Mondeo

Bosch EDC17C10 original files

The Bosch EDC17C10 unit page