Original file

Ford Mondeo Bosch EDC17C10 FS71-14C204-FG / 1037549433

An original (stock) flash read of the Bosch EDC17C10 control unit, fitted in Ford Mondeo, hardware number FS71-14C204-FG and software number 1037549433, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Mondeo1.6 diesel 116PS
Control unit
Bosch EDC17C10
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
FS71-14C204-FG
Software number
1037549433
Bosch part / software
1037559155
Vehicle maker's hardware number
FS71-12A650-FD
Software / calibration
FS71-12B684-DA

Technical data

Vehicle
BrandFord
Car modelMondeo
Engine1.6 diesel 116PS
Power116.0PS / 85.3kW
Control unit
Control unitBosch EDC17C10
ECU makerBosch
Hardware numberFS71-14C204-FG
Software number1037549433
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keye1087a4e01cf89b1
Identification read from the file
ECU nameEDC17C10
Read typeOBD read (no boot area)
ProcessorTC1797
Bosch part / software1037559155Offset in the file: 0x02001A
Vehicle maker's hardware numberFS71-12A650-FDOffset in the file: 0x00FD30
Software / calibrationFS71-12B684-DAOffset in the file: 0x00FD00
Engine descriptionFS71-14C204-FGOffset in the file: 0x27FF02
Bosch project identifier (EPK)45/1/EDC17_C10/57/P1212//CuPF1165P1212A912///Offset in the file: 0x03DF6C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number FS71-14C204-FG and software number 1037549433. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Ford MondeoFlash4,096.00 KB€15Add to cart

All reads of FS71-14C204-FG / 1037549433

Other pairs of Bosch EDC17C10

Bosch EDC17C10 original files

The Bosch EDC17C10 unit page