Original file

Ford F250 Bosch EDC17C10 HC3A-14C204-CLJ / 10SW085156

An original (stock) flash read of the Bosch EDC17C10 control unit, fitted in Ford F250, hardware number HC3A-14C204-CLJ and software number 10SW085156, 3,968.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford F2506.7 440PS
Control unit
Bosch EDC17C10
Read type
OBD read (no boot area)
File
3,968.00 KB · Flash
Hardware number
HC3A-14C204-CLJ
Software number
10SW085156
Vehicle maker's hardware number
CV6Q-12A650-AA

Technical data

Vehicle
BrandFord
Car modelF250
Engine6.7 440PS
FuelDiesel
Power440PS / 323.6kW
Control unit
Control unitBosch EDC17C10
ECU makerBosch
Hardware numberHC3A-14C204-CLJ
Software number10SW085156
File
File typeOriginal flash read
File size3,968.00 KB (4,063,232 bytes)
File keydfa95fdb49d0884d
Identification read from the file
ECU nameEDC17CP65
Read typeOBD read (no boot area)
ProcessorTC1793
Bosch part / software10SW085156Offset in the file: 0x00001A
Vehicle maker's hardware numberCV6Q-12A650-AAOffset in the file: 0x36B989
Software / calibrationHC3A-14C204-CLJOffset in the file: 0x1DFF4B
Bosch project identifier (EPK)38/1/EDC17CP65/57/P1417//P1417_1060///Offset in the file: 0x1D43BC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number HC3A-14C204-CLJ and software number 10SW085156. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C10

Bosch EDC17C10 original files

The Bosch EDC17C10 unit page