Original file

Ford F350 Bosch EDC17C10 JC3A-14C204-SK / 10SW085299

An original (stock) flash read of the Bosch EDC17C10 control unit, fitted in Ford F350, hardware number JC3A-14C204-SK and software number 10SW085299, 3,968.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford F3506.7 diesel 446PS
Control unit
Bosch EDC17C10
Read type
OBD read (no boot area)
File
3,968.00 KB · Flash
Hardware number
JC3A-14C204-SK
Software number
10SW085299
Vehicle maker's hardware number
CV6Q-12A650-AA

Technical data

Vehicle
BrandFord
Car modelF350
Engine6.7 diesel 446PS
Power446.0PS / 328kW
Control unit
Control unitBosch EDC17C10
ECU makerBosch
Hardware numberJC3A-14C204-SK
Software number10SW085299
File
File typeOriginal flash read
File size3,968.00 KB (4,063,232 bytes)
File keyf69a7eb08060f4b3
Identification read from the file
ECU nameEDC17CP65
Read typeOBD read (no boot area)
ProcessorTC1793
Bosch part / software10SW085299Offset in the file: 0x00001A
Vehicle maker's hardware numberCV6Q-12A650-AAOffset in the file: 0x36B989
Software / calibrationJC3A-14C204-SKOffset in the file: 0x1DFF4B
Bosch project identifier (EPK)38/1/EDC17CP65/57/P1417//P1417_1060///Offset in the file: 0x1D43BC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C10 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number JC3A-14C204-SK and software number 10SW085299. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C10

Bosch EDC17C10 original files

The Bosch EDC17C10 unit page