Original file

Opel Corsa Bosch EDC17C18 0281016956 / 1037511215

An original (stock) flash read of the Bosch EDC17C18 control unit, fitted in Opel Corsa, hardware number 0281016956 and software number 1037511215, 1,504.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Opel Corsa1.0 diesel 57PS
Control unit
Bosch EDC17C18
Read type
OBD read (no boot area)
File
1,504.00 KB · Flash
Hardware number
0281016956
Software number
1037511215
Software / calibration
P_863_EDC17C18_OA6CM_1

Technical data

Vehicle
BrandOpel
Car modelCorsa
Engine1.0 diesel 57PS
Power57.0PS / 41.9kW
Control unit
Control unitBosch EDC17C18
ECU makerBosch
Hardware number0281016956
Software number1037511215
File
File typeOriginal flash read
File size1,504.00 KB (1,540,096 bytes)
File key9d0af51c3d4e0624
Identification read from the file
ECU nameEDC17C18
Read typeOBD read (no boot area)
ProcessorTC1766
Bosch part / software1037511215Offset in the file: 0x08001A
Software / calibrationP_863_EDC17C18_OA6CM_1Offset in the file: 0x021078
Internal build stringME(D)/EDC17 B_CB.02.05.00Offset in the file: 0x00CA55
Bosch project identifier (EPK)51/1/EDC17_C18/863/P_863//P_863_EDC17C18_OA6CM_1///Offset in the file: 0x021078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C18 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281016956 and software number 1037511215. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C18

HardwareSoftwareVehicles
02810151511037A50497Opel Insignia
02810171061037506634Opel Astra-J
02810171061037507497Opel Astra
02810171061037509470Opel Astra, Opel Astra 2.0 CDTI ecoFLEX
02810171061037A50879Opel Astra
02810171061037A50880Opel Astra
02810173641037500327Opel Corsa
02810173641037503505Opel Corsa, Opel Corsa 2010 69.9KWKW, Opel Astra

Bosch EDC17C18 original files

The Bosch EDC17C18 unit page