Original file

Opel Corsa Bosch EDC17C18 0281017364 / 1037500327

An original (stock) flash read of the Bosch EDC17C18 control unit, fitted in Opel Corsa, hardware number 0281017364 and software number 1037500327, 1,504.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Opel Corsa
Control unit
Bosch EDC17C18
Read type
OBD read (no boot area)
File
1,504.00 KB · Flash
Hardware number
0281017364
Software number
1037500327
Software / calibration
P_651_EDC17C18_O9AC1_0

Technical data

Vehicle
BrandOpel
Car modelCorsa
Control unit
Control unitBosch EDC17C18
ECU makerBosch
Hardware number0281017364
Software number1037500327
File
File typeOriginal flash read
File size1,504.00 KB (1,540,096 bytes)
File key07b2303d50eb0efb
Identification read from the file
ECU nameEDC17C18
Read typeOBD read (no boot area)
ProcessorTC1766
Bosch part / software1037500327Offset in the file: 0x08001A
Software / calibrationP_651_EDC17C18_O9AC1_0Offset in the file: 0x021078
Internal build stringME(D)/EDC17 B_CB.02.05.00Offset in the file: 0x00CA0D
Bosch project identifier (EPK)51/1/EDC17_C18/651/P_651//P_651_EDC17C18_O9AC1_0///Offset in the file: 0x021078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C18 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281017364 and software number 1037500327. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C18

HardwareSoftwareVehicles
02810171061037507497Opel Astra
02810171061037509470Opel Astra, Opel Astra 2.0 CDTI ecoFLEX
02810171061037A50879Opel Astra
02810171061037A50880Opel Astra
02810173641037503505Opel Corsa, Opel Corsa 2010 69.9KWKW, Opel Astra
02810174521037506510Opel Astra-J, Opel Astra
02810174521037506514Opel Insignia
02810174521037506515Opel Insignia 2009 Turbo Diesel, Opel Insignia

Bosch EDC17C18 original files

The Bosch EDC17C18 unit page