Original file

Opel Astra Bosch EDC17C18 0281017452 / 1037543193

An original (stock) flash read of the Bosch EDC17C18 control unit, fitted in Opel Astra, hardware number 0281017452 and software number 1037543193, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Opel Astra2.0 petrol 159PS
Control unit
Bosch EDC17C18
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0281017452
Software number
1037543193
Software / calibration
P_651_EDC17C18_OB8C1_0

Technical data

Vehicle
BrandOpel
Car modelAstra
Engine2.0 petrol 159PS
Power159.4PS / 117.2kW
Control unit
Control unitBosch EDC17C18
ECU makerBosch
Hardware number0281017452
Software number1037543193
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyec7c2ccf968f1d36
Identification read from the file
ECU nameEDC17C18
Read typeCalibration only (data set)
Bosch part / software1037543193Offset in the file: 0x02101A
Software / calibrationP_651_EDC17C18_OB8C1_0Offset in the file: 0x021078
Bosch project identifier (EPK)51/1/EDC17_C18/651/P_651//P_651_EDC17C18_OB8C1_0///Offset in the file: 0x021078

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C18 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281017452 and software number 1037543193. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C18

HardwareSoftwareVehicles
02810174521037529765Opel Insignia
02810174521037529766Opel Insignia
02810174521037543190Opel Astra
02810174521037543192Opel Astra, Opel Astra j 2011y 2.0L
02810174521037543195Opel Insignia
02810174521037543196Opel Insignia
02810177121037508830Opel Corsa, Opel Astra
02810177131037512028Opel Corsa, Opel Corsa D 2010y

Bosch EDC17C18 original files

The Bosch EDC17C18 unit page