Original file

Opel Insignia 2009 80.9KWKW Bosch EDC17C19 0281015774 / 1037520104

An original (stock) flash read of the Bosch EDC17C19 control unit, fitted in Opel Insignia 2009 80.9KWKW, hardware number 0281015774 and software number 1037520104, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Opel Insignia 2009 80.9KWKW2.0 diesel · 110.0PS / 80.9kW
Control unit
Bosch EDC17C19
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0281015774
Software number
1037520104
Software / calibration
P_564_EDC17C19_OB5C2_0

Technical data

Vehicle
BrandOpel
Car modelInsignia 2009 80.9KWKW
Engine2.0 diesel
Power110.0PS / 80.9kW
Control unit
Control unitBosch EDC17C19
ECU makerBosch
Hardware number0281015774
Software number1037520104
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameOpel Insignia 2.0 CDTi 2009
File key61725fb4c0d0bbc2
Identification read from the file
ECU nameEDC17C19
Read typeCalibration only (data set)
Bosch part / software1037520104Offset in the file: 0x18001A
Software / calibrationP_564_EDC17C19_OB5C2_0Offset in the file: 0x180A10
Bosch project identifier (EPK)51/1/EDC17_C19/564/P_564//P_564_EDC17C19_OB5C2_0///Offset in the file: 0x180A10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C19 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281015774 and software number 1037520104. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C19

HardwareSoftwareVehicles
02810157741037506620Opel Insignia, Opel Insignia 2010 Turbo Diesel, Opel insignia
02810157741037506621Opel Insignia, OpelGm Insignia 2000TDCI
02810157741037506625Opel Insignia 2009 Turbo Diesel
02810157741037520103Opel Insignia
02810157741037520108Opel Insignia
02810157741037520110Opel Insignia
02810157741037A50627Opel Insignia
02810157741037A50629Opel Insignia, Opel Insignia 2009 Turbo Diesel

Bosch EDC17C19 original files

The Bosch EDC17C19 unit page